Thermador Masterpiece CET366YB, Use And Care Manual

Page: 9 / 72

Familiarizing yourself with your appliance
en-us
9
Familiarizing yourself with your appliance
4 Familiarizing yourself with your appliance
Familiarizing yourself with your appliance
4.1 Control panel
You can use the control panel to configure all functions of your appliance and to obtain information about the operat-
ing status.
Touch keys
Touch keys are touch sensitive areas. Touch a symbol to
activate the corresponding function.
Touch key Function
ON I OFF Main switch
⁠ ⁠ ... ⁠ Settings area
⁠ Select single cooking zone
Select dual cooking zone
Select triple cooking zone
JOIN I SPLIT Select Bridge zone
LOCK Wipe protection / Panel lock
POWER
BOOST
PowerBoost® function
COOK SMART CookSmart® function
MIN / LOW /
MED / MAX
CookSmart® levels
Press number above level indicator
TIMER Kitchen timer
Notes
¡
Keep the controls clean and dry. Moisture can impair
the function of the controls.
¡
Do not place cookware close to the displays and sen-
sors. The electronics may overheat.
¡
When you touch several symbols at once, for example
when food spills over, the settings will not change.
Displays
The displays show active settings and functions.
Display Name
Cooktop ready
Display Name
- Power levels
/ Residual heat indicator
⁠ Indicated function active
⁠ Cooking zone selected
PowerBoost® function active
CookSmart® active
⁠ /
/
/
CookSmart® frying level
⁠ Dual cooking zone active
⁠ Triple cooking zone active
Bridge zone active
Timer value
⁠ Timer indicator
4.2 Residual heat indicator
The cooktop is equipped with a residual heat indicator for
each cooking zone. The residual heat indicator lights up
when a cooking zone is turned off. Do not touch the cook-
ing zone when the residual heat indicator lights up.
Display Meaning
The cooking zone is hot.
Tip: You can keep a small quantity of food
warm or melt a chocolate coating.
The cooking zone is hot.
The residual heat indicator automatically turns on after a
power failure. The display lights up for approximately
30 minutes.