PREPARE FOR THE FIRST LOAD OF DISHES
ADD SALT TO WATER SOFTENER
Dissolves limescale and creates optimal washing results.
ADD RINSE AID
This dishwasher is designed to be used with rinse aid,
which enhances drying results.
• Add rinse aid before first use and when the Add
Rinse Aid indicator light on the control panel illuminates.
• Lift tab to open the rinse aid reservoir and add liquid
rinse aid into the oval until it is full, avoiding air vent.
Wipe up any excess rinse aid that may puddle.
Tip: Remove lid of rinse aid bottle for easier pouring.
max
vent
air
Ask your water company what the water hardness is or use
the included water test strip.
Set your dishwasher to the correct setting.
To adjust the setting:
- Press the ON/OFF button.
- Press the Setup button for 3 seconds until
H:0... is shown on the
display window.
- Make the selection with setting buttons - +.
- Press and hole the Setup button for 3 seconds.
ADJUSTING THE WATER SOFTENING SYSTEM
• ‹‹
• ‹‚
• ‹ƒ
• ‹„
• ‹…
• ‹†
• ‹‡
• ‹ˆ
:
:
:
:
:
:
:
:
0-8
9-10
11-12
13-15
16-20
21-26
27-38
39-62
0 -1.1
1.2-1.4
1.5-1.8
1.9-2.1
2.2-2.9
3.0-3.7
3.8-5.4
5.5-8.9
Water
hardness
value
°Clarke
Hardness
range
mmol/l
Factory
setting
soft
soft
medium
medium
medium
hard
hard
hard
setup 3 sec.
ADD DETERGENT
Use detergent tabs, fresh powdered detergent or liquid detergent. For the Glass cycle, use
1 -1.75 Tbsp. of detergent or use detergent tabs with glassware protection.
Tip: dispenser lid should slide closed easily.
1.75 Tbsp. (25 ml)
3 Tbsp. max.
1 Tbsp. (15 ml)
TO CLOSE THE COVER
CLICK
DETERGENT AMOUNTS
LAY TABS FLAT
