If you smell gas, do not attempt to
light any burners.
1. Make sure that all control knobs are turned to
the OFF position.
2. Open the hood to allow any accumulated gas to
dissipate and wait five minutes before trying to
light the unit.
3. If the smell of gas is still present, turn off the gas
supply to the unit at the manual shut off valve.
4. Check the unit for leaks by following the
instructions in Section 5 in the Installation
Instructions or call your authorized servicer or
the gas company.
SECTION 3: USING YOUR CHAR GLO
®
BARBECUE
Before the First Use
1. Record model and serial number of your barbecue
for future contacts with Thermador
®
or an
authorized servicer (Located on left-side LP
storage drawer).
2. Burn off residual manufacturing oils. Follow Main
Burner Lighting Instructions:
✓
Turn all burners on HI setting for 15 - 20
minutes with hood/lid down.
✓
Cool.
3. Prepare for use.
✓
Optional step: Line drip tray with heavy-duty
aluminum foil and a thin layer of sand or bird
gravel.
✓
Protect the finish with a stainless steel cleaner
or protective polish. See care suggestions
Page 23.
WARNING
Open hood/lid before attempting to light the appliance. Failure to
open the hood could allow gas to accumulate which could cause an
explosion.
Page 11