THERMACUT EX-TRAFIRE 30H, Operator'S Manual

Page: 27 / 56

EX-TRAFIRE
®
30H
Operator Manual, Revision T-15 4-27
Operating the hand torch
Operating the torch safety trigger
1�
2�
3�
4�
WARNING
Plasma arc is generated immediately
when the torch trigger is depressed
Plasma arc is generated immediately when the torch trigger is depressed�
The plasma arc will cut quickly through gloves and skin� Make sure the power supply is switched off
before changing consumables�
•
Keep away from the torch tip�
•
Do not hold the piece that is to be cut and keep your hands away from the cutting path�
•
Never point the torch toward yourself or toward others�
Safety trigger guard position�
Release the trigger guard�
Press the torch trigger for ignition of the arc�
Release the torch trigger to stop cutting�