background image

2

www.thermastor.com • [email protected]

Toll-Free 1-800-533-7533

1 Safety Information

•  Do not operate the unit with a cut or frayed power cord. 

Replace cord if it becomes damaged.

•  Do not unplug the unit by pulling on the cord. Grasp the 

plug firmly and pull it out of the wall socket or power 
receptacle.

•  Always use a grounded outlet.
•  Never operate electrical equipment in standing water.
•  Never operate with the safety grills removed. Personal 

injury may result.

•  Do not stick your fingers or other objects through the 

safety grills.

•  Do not restrict airflow to the unit. This may cause the 

unit to overheat.

•  Unit should never be serviced or cleaned while it is 

plugged in.

•  Do not plug more than 9.0 amps total into the GFCI 

outlet.

•  Do not sit or stand on the unit or use as a shelf or 

table.

•  Check GFCI protection before each use by pushing 

“test” button. If operating properly, “reset” button will 
pop out.

•  Before leaving an Axial Air Mover unattended, ensure 

children do not have access to the equipment. Do not 
allow children to play with or near the unit or in its air 
flow.

•  To reduce the risk of fire or electric shock, do not use 

this air mover with any solid-state speed control device.

LIRE ET CONSERVER CES INSTRUCTIONS

•  Risque de choc électrique Peut causer des blessures ou 

la mort. Débrancher toutes les alimentations en courant 
électrique à distance avant l’entretien ou le nettoyage.

•  Ne pas utiliser l’appareil avec un cordon d’alimentation 

coupé ou effiloché.

•  Ne pas débrancher l’appareil en tirant sur le cordon. 

Tenir la fiche fermement et la tirer hors de la prise 
murale ou la prise d’alimentation électrique.

•  Toujours utiliser une prise mise à la terre.
•  Ne jamais utiliser l’équipement électrique dans de l’eau 

stagnante.

•  Ne jamais utiliser sans les grilles de protection. Des 

blessures risquent d’en résulter.

•  Ne pas passer les doigts ou d’autres objets dans les 

grilles de protection.

•  Ne pas diminuer le débit d’air arrivant jusqu’à l’appareil. 

L’appareil risque de trop chauffer.

•  Ne pas brancher plus de 9 ampères au total au 

différentiel.

•  Ne pas s’asseoir ou se tenir debout sur l’appareil; ne 

pas l’utiliser comme étagère ou table.

Table of Contents

Introduction

  ...............................................................

FOCUS

TM

 Technology Features and Benefits

 ....................

1.  Safety Information

 .................................................2

2.  Intended Application

 ..............................................3

3.  Safety Certifications

 ...............................................3

4.  Specifications

 ........................................................3

5.  Power Requirements

 ..............................................3

 

5. Daisy-Chaining ................................................3

 

5.2 Recommended Use .........................................3

 

5.3 Integrated Cord Wrap .......................................4

6.  Applications

 ..........................................................4

 

6.2 Placement ......................................................4

 

6.3 Orientation of Directional Drying .......................5

7.  Operating Instructions

 ............................................5

8.  Operator Panel Features

 .........................................5

 

8. Run-Time Hour Meter .......................................5

 

8.2 2 Amp Circuit Breaker ....................................5

 

8.3 Power Indication Lamp .....................................6

 

8.4 3-Position Drying Selector Switch ......................6

 

8.5 GFCI Protection ...............................................6

9.  Maintenance

 .........................................................6

 

9. Servicing ........................................................6

 

9.2 Motor Lubrication ............................................6

 

9.3 Cleaning .........................................................7

10. Replacement Parts and Optional Accessories

 ...........7

11. Wiring Diagram

 .....................................................7

12. Warranty

 ...............................................................9

Serial No. ___________________________

Purchase Date ______/______/_____

Dealer’s Name ___________________________________

Summary of Contents for Phoenix TS-285










Reviews: