Table of Contents
1. Intended Application ...................................................... 2
2. Registration ................................................................... 2
3. Specifications ............................................................ 3
4 . Installation .................................................................... 3
4.1 Location .................................................................... 3
4.1A No Ducting ............................................................ 3
4.1B Duct Inlet and Outlets Ducted ............................... 3
4.1C Remote Area w/Outlets Ducted ............................. 3
4.1D Remote Area w/Inlets Ducted ................................ 4
4.2 Electrical Requirements ............................................. 4
4.3 Condensate (Water) Removal ..................................... 4
5. Ducting .......................................................................... 4
5.1 Optional Ducting Kit ................................................... 4
5.2 Ducting for Dehumidification ..................................... 4
6. Operation ....................................................................... 5
6.1 Humidity Control Adjustment ..................................... 5
6.2 Blower (Fan) Switch .................................................. 5
7. Maintenance .................................................................. 5
7.1 Air Filter..................................................................... 5
8. Service .......................................................................... 5
8.1 Technical description ................................................. 5
8.2 Troubleshooting ......................................................... 6
8.3 Defrost Thermostat .................................................... 6
9. Service Parts List ........................................................... 6
10. Accessory/Replacement Parts List ............................... 6
11. Optional Remote Humidity Control ............................... 7
12. Wiring Diagram ............................................................ 7
Warranty ............................................................................ 8
Precautions
• Do not operate the Santa Fe
™
Max Dry Dual XT with a cut
or frayed power cord.
• Do not unplug the unit by pulling on the cord. Grasp the
plug firmly and pull it out of the wall socket or power
receptacle.
• Always use a grounded outlet.
• Never operate electrical equipment near or in standing
water.
• Do not stick your fingers or other objects through the safety
grill.
• When changing filters, do not stick fingers or other objects
in the unit.
• No user serviceable components. Contact installer or call
1-800-533-7533 for all repair or warranty needs.
• Do not restrict airflow in to or out of the unit. This may
cause the unit to overheat.
• The unit should never be serviced or cleaned while it is
plugged in.
• Do not sit or stand on the unit, or use as a shelf or table.
• Before leaving the unit unattended, ensure children do not
have access to the equipment. Do not allow children to play
with or near the unit or in its air flow.
• The unit is designed to be installed indoors only.
Read the installation, operation and maintenance
instructions carefully before installing and using this
unit. Proper adherence to these instructions is essential
to obtain maximum benefit from your Santa Fe Max Dry
Dual XT dehumidifier.
Read and Save These Instructions
WARNING!
— This symbol means important
instructions. Failure to heed them can result in serious
injury or death.
CAUTION!
— This symbol means important
instructions. Failure to heed them can result in injury or
material property damage.
1. Intended Application(s)
The Santa Fe Max Dry Dual XT is intended for use in
crawlspaces or basements: however, the unit can be placed
in almost any residential setting where dehumidification is
desired. Use in non-residential applications and pool areas
may void warranty.
The Santa Fe Max Dry Dual XT is designed to operate in
temperatures between 45° and 95°F. This unit works most
effectively between 56° and 95°.
In order to efficiently control humidity levels, the area in
which the dehumidifier is to be operated must be free of
water intrusion or excessive fresh (outside) air infiltration.
Before installing the Santa Fe Max Dry Dual XT, water
intrusion and air infiltration problems should be addressed.
2. Registrations
The Santa Fe Max Dry Dual XT conforms to UL STD 1995.
TABLE OF CONTENTS
2
Santa Fe Max Dry Dual XT Installer’s & Owner’s Manual
