====
=
The use of high quality Smart
Smart
Smart
SmartRooms Comfort Controllers are recommended for proper system
performance and warranty. The sensor must be placed over a panel with a heat shield. The heat
shield could be something as simple as a piece of aluminum foil. The heat shield stops the
radiant heat from directly affecting the sensor, which in turn would affect temperature accuracy.
The Smart
Smart
Smart
SmartRooms Comfort Controller can be placed anywhere that is convenient for the owner.
Warning sticker must be attached to the electrical service panel. Ensure that all branch circuits
supplying radiant heating are clearly marked as such.
Panel installation is now complete. Insulation must then be installed over an A) heated area use
3” (R10) insulation B) unheated area use 6” (R20) insulation C) crawl space use 9” (R30)
insulation.
CAUTION:
CAUTION:
CAUTION:
CAUTION:
-
Panels must be turned off until joint compound has fully cured.
-
Therma
·
Ray panels must not be placed over wood framing members, partitions,
cupboards, or other obstructions or come in contact with plastic piping.
-
Cellulose insulation is not recommended unless it meets or exceeds standard CGSB
510GP-60M or equivalent and must not contact face of heater panel.
-
Use only copper conductor supply wire.
-
Do not install heating panels in a room over an unheated crawl space unless floor
is properly insulated.
