therM Stat, User Manual, Page: 17 / 21

32
31
A1 A2
RT1 -
RT2 L N
230VAC
REMOTE AIR PROBE
(Optional)
FLOOR PROBE
(Optional)
L N SL
To reset the device to factory default settings, follow these steps:
• Use the Left / Right keys to scroll to SETUP ........................................
• Press and hold the Tick key for 10 seconds ........................................
• All of the icons on the display will appear for 2 seconds, then the display
will show option 1 or 2.
• Use the Left / Right keys to scroll between modes (selection will flash).
Mode 1 = Thermostat
Mode 2 = Time Clock
• Press the Tick key to confirm selection ...............................................
The thermostat will revert to the main display screen for the selected mode.
Note: Factory reset will cancel all parameters that were entered during the set-up and
pairing operations. These processes must be repeated after factory reset is completed.
A1 A2 RT1 - RT2 L N
230VAC
REMOTE AIR PROBE
(Optional)
FLOOR PROBE
(Optional)
L N SL
A1 A2 RT1 - RT2 L N
230VAC
REMOTE AIR PROBE
(Optional)
FLOOR PROBE
(Optional)
L N SL
This product must only be installed by a qualified electrician
and comply with local installation regulations.
Wiring Diagram
therM stat to UH3 and Optional Remote Probe Connections
Factory Reset