-4-
-5-
EN
EN
7. ˚C/˚F Selector (on the back of the thermometer):
Move the
position of the selector to select the temperature display unit,
choose between °C or °F.
8. ON/OFF Button
: Turn on/off the digital cooking thermometer.
Note:
*
If probe is not inserted into food and put directly inside the
oven/grill/smoker, the temperature reading of oven heat above
200˚F (93˚C) will only be accurate to within 2˚F to 5˚F (1.1˚C to
2.7˚C).
4. Important Notes/Warning
This product is not for use in microwave ovens.
Keep out of reach of children.
Do not expose probe directly to flame. Doing so will cause
wire to deteriorate.
When not in use, turn the digital thermometer off to conserve
battery.
Be sure to use a good quality alkaline battery and replace it
often. A weak battery will cause the unit to lose accuracy.
Always dispose of depleted batteries safely.
A food thermometer can assist in the proper preparation of
food. However, use of this electronic device does not guard
against unsafe food handling practices. Always follow proper
food preparation techniques to limit the risk of food borne
illness.
The stainless-steel wire probe should not be exposed to oven
temperatures exceeding 716˚F (380˚C).
Do not let probe or cable come into direct contact with the
oven elements, as this will result in faulty readings and/or
damage.
If the temperature exceeds or falls below the measurable
ranges, the LCD screen will display the following letters: HHH
If the unit displays LLL or HHH instead of the probe
temperature, wait for probe to reach room temperature. If LLL
or HHH is still displayed it is likely the internal probe wire has
shorted out either through moisture or heat damage.
If the temperature displayed seems to read too high or the
temperature seems to increase too quickly, check to make
sure the probe tip is not poking through the food to outside.
for temperatures above range and LLL for temperatures below
range.
5. Battery Installation/Set Up
Slide open the battery compartment door at the back of the
unit.
Insert one (1) AAA battery according to the polarity markings.
Replace the battery compartment door.
Remove the printed vinyl sticker from the LCD screen.
6. Operating Instructions
Using the Cooking Thermometer
Plug the temperature probes into the corresponding probe
sockets on the right side of the device.
Make sure the probe cable is free of knots. Make sure the
sensor plug at the end of the probe cable is fully inserted into
the probe sockets. (Note: if the probe is not plugged in
properly or is crimped, the display will show LLL.)
Slide the switch on the back of the device to choose between
displaying the temperature in ˚F or ˚C.
Set your desired cooking temperatures for the probes by
choosing Quick Temperature Setting or User-defined
Temperature Setting.
(see Section Quick Temperature Setting
and User-defined Temperature Setting below)
