therm-ic Thermic Refresher, Instructions For Use Manual

Page: 8 / 87

8
INSTRUCTIONS FOR USE / ENGLISH

Make sure that the unit is not wet (e.g. by spray
water) and do not use it if your hands are wet.
After use, always switch off the unit and unplug
the power cable.

Use this device only in closed, dry rooms.

Make sure that the air intake openings are not
covered or dirty.

If the cable or housing parts are damaged or if
the air intake or outlet openings are blocked or
damaged, send the unit to a dealer for repair.
 Repairs to electrical equipment may only be
carried out at specialised repair facilities.
Improper repair could create substantial danger
for the user.

Never wind the power cable around the unit.

When not in use store the unit folded and in a dry
place.

Do not leave this device switched on while
unattended.

The unit must not be used for any purpose other
than that intended.
DEVICE DESCRIPTION
ThermicRefresher 230V / 120V
1.1 Status display
1.2
Timer time display (1h/3h/6h)
1.3 Function key
ThermicRefresher 12V
2.1 Status display
2.2 ON/OFF switch
TECHNICAL DATA
230V version: 230V~ 50Hz 50W
120V version: 120V~ 60Hz 50W
12V version: 12V == DC 35W
SAFETY FUNCTIONS

Overheating protection

Temperature control