THERAGUN G2PRO, Owner'S Manual, Page: 14 / 84

HOW TO EXPERIENCE
THE G FACTOR
I started my G2PRO
™
. Now what? How often should I use the
G2PRO
™
?
How fast should I move the
G2PRO
™
?
How hard should I press the
G2PRO
™
into my muscles?
Contact your body with the G2PRO
™
and let it
float across your body. Get used to the feeling
of vibration therapy. Apply pressure that is
comfortable for you. Let the G2PRO
™
do the
work. You should not be sore as a result of use.
We recommend 15 minutes per session for
your entire body. Feel free to treat your extra
sore muscles for an additional 30-60 seconds
throughout the day.
The slower the movement the better. Move
approximately 3 cm per second. Take your time
floating the G2PRO
™
across your muscles.
The best process is to start the G2PRO
™
away
from your body, then once it is operating
contact your body with the AmpBIT and allow
the G2PRO
™
to float across your tissue. Once
you have a feel for the pressure you desire you
can increase the pressure slowly until you reach
a comfortable balance.
How often should I replace my
AmpBITs?
How long does the battery last?
If I need more information, what
should I do?
On average the AmpBITs should be replaced
every 90 days. In a clinical setting, where
your average daily use will certainly be more,
we recommend replacing the AmpBITs after
approximately 30 days of use.
Battery lasts for approximately 45 minutes
depending on the amount of pressure applied.
Visit us online at www.TheraGun.com/training for
detailed how-to videos.
12