Assembly of System
Choose the generator lead wire length that is most convenient for use. This will depend on
the location chosen to place or carry the generator. Please ensure that the spare length of
wire is not so long as to present a strangulation hazard.
Connect the end of generator lead wire that has the small block to
æ©ǽ׬ÄÞˣ橽æÚ˽ö¬ÚÞɋ
Note: This may be done before connecting the electrodes to
the back if that is easier to manage.
To remove the belt clip, pull the bottom of the curved end
approximately ¼” away from the generator so that the clip can be
pushed upwards until clear of the generator
If it is desired to attach the generator to a belt, waistband or pocket,
½Ëæ橽潬×ÄÞ½¬æ©ĉæެˣ橽¬×¬ÄæËæ©
generator until the retainer slides into the hole in the generator.
ËÄÄææ©Ëæ©ÚÄˣ橤ÄÚæËÚ½ö¬Úə½Ú¤Þæ½ËºɚæË
the generator.
DIRECTIONS FOR USE
Ǽǻ
