TherAdapt Products OC-150 Instructions Manual Download Page 1

TherAdapt

®

 Odyssey Chair (OC-150/250) Instructions: Page 1 of 7 

 

Odyssey Chair 

 

 
 

Please read all of the following information before using this product. 

 

TherAdapt

®

 Products Inc. has designed and manufactured this product with the well being of the user 

and caregiver(s) in mind.  It is our endeavor to provide products which are attractive, comfortable, 
useful, highly adjustable, long lasting and safe.  As when using any product, precautions must be taken. 

 
 
 
 
 
 
 
 
 
 

 
 
THE MANUFACTURER IS NOT RESPONSIBLE FOR INJURIES RESULTING 
FROM ANY CUSTOMIZATION OR MODIFICATION OF THE EQUIPMENT THAT 
WAS NOT COMPLETED BY THE MANUFACTURER. 
 

USE:

  The Odyssey Chair is designed for a single purpose: as a freestanding floor chair.  

No  other use is per mitted

including, but not limited to a seat used for transportation in an automobile, stroller, or any other mobility device.   

 

CARE:

  Take care to inspect the ongoing condition of all parts of your Odyssey Chair.  With normal use, over time 

bolts/knobs/washers may loosen.  Verify that all knobs, bolts, and washers are properly positioned, tight, and secure.  Contact 
the manufacturer for replacement or repair of necessary items.  All components may be cleaned with mild soap and water, or 
a gentle sanitizing spray.  

Do not

 use abrasive cleaners.  Wipe components dry after cleaning.  Always store indoors.  

Use 

chair on level surface

 

 

 

 

 

 

 

PLEASE COMPLETE AND RETAIN FOR YOUR RECORDS 

 

Odyssey Chair OC-_______________  

  Serial Number: _____________________ 

Purchase date:  __________________ 

 

WARNING: This product must only be used un

der the 

recommendation of a physician and / or licensed therapist and with 

adult supervision.  Never leave user unattended. Al ways keep user 

in view.  It is your responsibility to properly use and maintain your 

Odyssey Chair.  Failure to foll ow USE and CARE instructions or 

ASSEMBLE the chair properly as  outlined may result  in bodily 

injury.

   

***Warning: This chair is as  stable as a typical kitchen 

chair or baby highchair.   How ever, if your child self -stimulates 

using vestibular movements (rocking back and forth), this product 

might not be the best choice to meet the child's needs.***

 

WARRANTY: The m anufacturer provides a full on e (1) year w arranty, beginning the date 

shipped by the manufacturer.  The w arranty pr ovides full rep lacement of all parts against 

breakage when used in compliance w ith the manufacturer’s USE and CARE i nstructions.  Use 

or modification beyond the normal capacity or range of adaptability designed into the products 

will void the warranty.  The foregoing is TherAdapt’s sole liability for consequential damages. 

 

Summary of Contents for OC-150








Reviews: