Please read these instructions thoroughly before use. Failure to follow instructions may result in
equipment damage or failure, losses, injury or death.
DANGER:
To avoid possible electric shock:
• If the power cord has been damaged, DO NOT operate, SuperFlo™ Pump should be replaced.
• If the power cord lead has been damaged, DO NOT operate, SuperFlo™ Pump should be replaced.
• Close supervision is necessary when the unit is used near children.
WARNING:
To reduce the risk of electric shock:
• Connect only to a properly grounded receptacle, which is serviced by a Ground Fault Circuit
Interrupter and never remove the ground pin from the plug.
• Provide a “drip loop” for the power cord. This is a loop in the cord below the level of the receptacle or
plug that prevents water from traveling along the cord in the direction of the receptacle.
• ALWAYS unplug the SuperFlo™ Pump from power source when it is not in use, and before installing,
removing or servicing the SuperFlo™ Pump components.
• DO NOT immerse the SuperFlo™ Pump plug in water or attempt to use a wet plug.
• The SuperFlo™ Pump is NOT suitable for use in swimming pools, swimming ponds, or other
situations where bodily contact is made with the water.
CAUTION:
To reduce the risk of equipment damage or failure:
• DO NOT place SuperFlo™ Pump near flammable or other dangerous materials or objects.
• DO NOT use the SuperFlo™ Pump for fluids other than water.
• ALWAYS unplug the unit if there is no water running through it to prevent over heating.
• ALWAYS operate the pump completely submerged for proper cooling.
• DO NOT operate during freezing conditions. Drain SuperFlo™ Pump and store in a protected
location.
The Pond Guy® is not responsible for equipment damage or failure, losses, injury or death resulting
from failure to follow safety precautions, misuse or abuse of equipment.
thepondguy.com | 866-POND-HELP (766-3435)
2
