Attach the Fittings
Attach the fittings to the inlet and outlet of the
AllClear™ G2 Filter with the compression ring. The
o-rings should be between the filter housing and the
step down fitting to create a watertight seal when
secure. Note: The outlet on the opposite side of the
filter is reserved for the backflush option. This outlet
should remain capped unless the backflush is in use.
Cut Fittings to Size
Temporarily slide your tubing onto the fitting to
determine the size connection you will use. Then, cut
the fittings to the largest connection that will work
with your plumbing to ensure maximum water flow.
Connect the Plumbing
Connect the plumbing coming from your pump into
the inlet indicated on the filter and secure with a
hose clamp. Then, connect plumbing that will return
the water to your pond or waterfall into the outlet
indicated on the filter and secure with a hose clamp.
Plug in Pump and Filter
Plug your pump into a GFCI protected outlet. Once
water is flowing through the filter plug the AllClear™
G2 UV Filter into a GFCI protected outlet.
INSTALLING YOUR
ALLCLEAR
™
G2 FILTER:
AllClear™ Rock Cover
Camouflage and protect the AllClear™ G2 Filter
from the outside elements use an AllClear™ Rock
Cover. View online at thepondguy.com/allclearg2
thepondguy.com | 866-POND-HELP (766-3435)
6
