ALC-1809 LOUDSPEAKER CONTROLLER
19
When SurroundWizard™ software is communicating to a connected Theory ALC, any changes made to the
controls within the software are loaded into the ALC DSP chip
in real time
and changes will be heard through the
connected loudspeakers.
At this point, however, these settings exist only in the running DSP chip -
they are not yet stored in ALC memory,
nor on your PC
.
CONCEPT TO KNOW #5:
In order for a Theory ALC to “remember” DSP settings when powered off and then powered up again,
your
settings must be stored into the on-board flash memory so that they can be loaded by the microprocessor during
the power-up “initialization” process
.
ALC PROGRAMMING
