Themis RES-XR4-3U, Installation Manual

Page: 76 / 184

2-14
Themis Computer
RES-XR4-3U Installation Manual Version 1.3
3. Locate the lithium battery socket and squeeze the latch (see A , Figure 2-11 )
together until the battery lifts out of its socket.
4. Remove the old battery and dispose of in accordance to local guidelines.
Replace with a new CR2032 lithium battery.
2.1.4.3 .Installing a Lithium Battery
Perform the following steps to insert a new lithium battery:
1. Tilt the replacement battery into the empty socket so that it is angled under the
battery latch (see
B , Figure 2-11 ).
2. Carefully press down on the battery until it clicks firmly into place.
2.1.5 SAS/SATA Storage Drive
Perform the following steps to remove and install a storage drive, which may be
either SAS or SATA. The front doors of the RES-XR4-3U must be unlocked and
opened to access the storage drives (see
Figure 2-12 on page 2-15).
Figure 2-11. The Lithium Battery and Socket
To release, squeeze battery latch together…
Battery
A B
Latch
… and remove battery from socket