Themis RES-XR4-3U, Installation Manual

Page: 63 / 184

2-1
Themis Computer
2
Installation and Operation
This chapter describes:
• How to install a memory module, storage drive, PCI card, 120-mm-fan, power
supply, and lithium battery.
• Rack-mount brackets
• How to turn the RES-XR4-3U on and off
2.1 Installation Procedures
To install or replace a storage drive , fan , or power supply , skip the next section and
proceed directly to page 2-14, page 2-18, or page 2-21, respectively. Replacement of
motherboard components requires removal of the protective cover.
2.1.1 Remove Protective Top Cover
To access a motherboard component, open the RES-XR4-3U as follows:
Caution: Use industry-standard ESD grounding techniques when handling all
components. Wear an antistatic wrist strap and use an ESD-protected mat. Store
ESD-sensitive components in antistatic bags before placing them on any surface.
Handle all IC cards by the front panel or edges only.
Installation
Section
Chapter