Themis RES-XR4-3U, Installation Manual

Page: 33 / 184

1-3
Themis Computer
1—Overview and Specifications
Overview
• SATA storage drive controllers.
• Onboard graphics display (VGA).
• 1 DB9 serial port.
• PCI-e 3.0 card slots.
Where there are differences in the features of the different motherboard configura-
tions, those differences are shown in
Table 1-2 .
I/O panel views for each motherboard option begin on page 1-9. Block diagrams for
each of the motherboard families are shown beginning on page 1-14.
1.1.1 External Features
The RES-XR4-3U Rear I/O front panel houses eight removable storage drives ( Fig-
ure 1-2 ), and the Front I/O has three ( Figure 1-3 ). In addition, the front panel sup-
ports a CD-RW/DVD-ROM combo slimline drive. If supported, a combination of
both SATA and SAS drives may be installed. Drive requirements should be specified
at the time the system is purchased.
Also included on the front panel is a system power ON/OFF button and LEDs. The
I/O panel contains I/O faceplates for seven PCI cards, two AC power supplies with
latch locks and power-cord sockets, and all I/O connectors. Major internal compo-
nents of the RES-XR4-3U can be seen in the open top views (cover removed) begin-
ning on page 1-11.
Table 1-2. RES-XR4-3U Motherboard Specifications
Motherboard
a
Xeon CPU PS2
USB
Ports
SAS 10 GBE
Mem
Slots
PCI-e (PCI Express)
b
33MHz x16 x8
X9DRH-7F/7TF (2)E5-2600 No 4 Yes Yes
c
16 1 6
X9DRH-iF/iTF (2)E5-2600 No 4 No Yes
c
16 1 6
X9DR3-F (2)E5-2600 Yes
d
4 Yes No 16 3 3
X9DBL-3F (2)E5-2400 Yes 2 Yes No 6 1 1 4
e
X9DBL-iF (2)E5-2400 Yes 2 No No 6 1 1 4
e
a—SuperMicro
b—Both CPUs must be installed to access all PCIe slots.
c—10 Gigabit Ethernet for 7TF/iTF, Gigabit Ethernet for 7F/iF
d—A single PS2 connector provides for either PS2 keyboard or mouse, but not both.
e—One PCIe x4 in x8 slot