Themis RES-XR4-3U, Installation Manual

Page: 171 / 184

E-1
Themis Computer
Repackaging Instructions
E.1 Repackaging for Shipment
If it becomes necessary to return equipment to Themis Computer, it is very important that the equip-
ment be shipped in the original packaging which provides adequate protection against crushing and
moisture invasion. Failure to use original packaging materials, exactly as described in this appendix
may invalidate the warranty . If the original packaging is no longer serviceable, or no longer avail-
able, please contact Themis Customer Support for a new shipping box to send back your RES-XR4-3U
ensuring protection from damage in transit. If it becomes necessary to ship in packaging other than that
provided by Themis, equipment should be wrapped in a moisture resistant covering and placed either in
double boxes, or in boxes with crush resistant insulation between the equipment and the outer walls of
the container. When using the original packaging, the clear plastic membrane should be placed next to
the equipment; i.e., up against the bottom, or down against the top. The following instructions assume
the original packing components are still available, and in serviceable condition.
Caution: Failure to use the original Themis packaging materials, and failure to fol-
low the instructions of this Appendix E, may invalidate the warranty . Please con-
tact Themis if new packaging materials are required.
Appendix
E