Themis RES - 32XR3, Installation Manual

Page: 43 / 142

1-17
Themis Computer
Overview and Specifications
Specifications
Front Access —Opening the two front doors of the RES-21XR3 requires removing
the front sound baffle. To do this, loosen the two (2) captive knurled Phillips screws
holding the baffle to the chassis and remove the baffle.
Rear Access —Accessing the I/O connectors and PCI cards on the rear of the RES-
21XR3 for X8SAX requires opening the rear sound baffle door. To do this, loosen
the four (4) captive knurled Phillips screws
A holding the baffle door to the chassis
and swing the door downward away from the chassis, exposing the rear connectors
and PCI cards.
Removing the protective top cover for access to the interior requires that the rear
sound baffle be totally removed (this can be done with the baffle door closed). To do
this, five (5) M3x4 flathead Phillips screws
B must be removed, two on each side of
the baffle and one (captive) in the middle on the top (see Figure 1-7 ).
After removing the rear baffle, the top cover can be removed as described in Section
2.1.1, “Remove Protective Top Cover,” on page 2-1 (Chapter 2, "Installation and
Operation").
Figure 1-7. RES-21XR3 with Rear Sound Baffle Installed (Rear View)
Rear Sound Baffle
A A A A
B
B
Right Side
B
B
B
Left Side
Rear Rear