Themis RES - 32XR3, Installation Manual

Page: 31 / 142

1-5
Themis Computer
Overview and Specifications
System LEDs and I/O Connectors
cards (graphics, RAID, NIC, etc.), of which only six (6) are usable (the motherboard
has only six slots, 1 through 6). The chassis is also available with horizontal slots to
accommodate riser cards with horizontally mounted I/O cards. Two AC power sup-
plies with latch locks and power-cord sockets, and all I/O connectors (see
Figure 1-5
on page 1-7) are also supported.
Major internal components of the RES-21XR3 for X8SAX can be seen in the open
top view (cover removed) of
Figure 1-4 on page 1-6.
1.2 System LEDs and I/O Connectors
All RES-21XR3 for X8SAX system LEDs are located on the front panel (see A , Fig-
ure 1-5 , page 1-7); all I/O connectors are located on the rear panel (see B , Figure
1-5 ).
LEDs are described in Table 1-3 on page 1-8; I/O connectors are described in
Table 1-4 , page 1-9.