Themis RES - 32XR3, Installation Manual

Page: 30 / 142

RES-21XR3 for X8SAX Installation Manual
1-4
Themis Computer
The RES-21XR3 for X8SAX front panel houses eight removable storage drive bays
(see
Figure 1-3 ). In addition, the front panel supports a CD-RW/DVD-ROM combo
drive. The motherboard supports SATA drives only, but SAS drives may be sup-
ported by optional I/O cards, hence a combination of both SATA and SAS drives
may be installed. Drive requirements should be specified at the time the system is
purchased.
Also included on the front panel is a system power button and LEDs (see Figure 1-5
on page 1-7). The rear panel contains I/O faceplates for seven (7) full-height PCI
Figure 1-3. External Features of RES-21XR3 for X8SAX (Front and Rear)
Front View (Doors Open)
Dual Power Supplies
System Power
ON/OFF Switch
CD-RW/DVD-ROM
Combo Drive
Rear I/O Panel (see Figure 1-5 , page 1-7)
17” (42.7 cm), 19” with Rack Mounts
17” (43.2 cm) deep
Rear View
PCI-Express 2.0 x16 slot
PCI-Express 2.0 x16 slot
64-bit 133/100-MHz PCI slot
PCI-Express 2.0 x4 in a x8 slot
Slot 1
Front LED Indicator Panel
(see Figure 1-5 on page 1-7 )
Hard-Disk/Solid-State Drive (total of 8)
3.5”
(2RU)
64-bit 133/100-MHz PCI slot
PCI 32-bit slot
(SAS* or SATA ll)
* SAS may be supported by
optional I/O cards
AC Power Socket
(3-prong NEMA 15)
Power Supply
Latch Lock
Slot 7
Empty
PS1
PS2
Note:
A 8/32-16 UNC grounding lug will
be added to the rear of the system
to the left of the PCI Card slots.
Also available with horizontal
slots for larger cards