Themis RES-22XR3, Installation Manual

Page: 88 / 162

3-18
Themis Computer
RES-22XR3 Installation Manual - Configuration 1 Version 1.3
3.3.5.7 PCI-E Slots 1~7 x8
This feature allows you to Enable or Disable any of the PCI slots. The options are
Enable (default) and Disable.
3.3.5.8 Onboard LAN Options ROM Select
This feature allows the user to select the onboard LAN option ROM type. The
options are iSCSI and
PXE (default).
3.3.5.9 Load Onboard LAN1 Option ROM/Load Onboard LAN2 Option
ROM
Select Enabled to enable the onboard LAN1 or LAN2 Option ROM. This is to boot
the computer using a network interface. The options are Enabled and
Disabled
(default).
3.3.5.10 Load Onboard SAS Option ROM
Select Enabled to enable the onboard SAS Option ROM. This is to boot computer
using a network interface. The options are
Enabled (default) and Disabled.
3.3.5.11 Boot Graphics Adapter Priority
This feature allows the user to specify which graphics controller is to be used as the
primary boot graphics controller. The options are
Onboard VGA (default), Off-
board VGA, and PCI-E Slot 7
3.3.6 Super IO Device Configuration
3.3.6.1 Serial Port1 Address/Serial Port2 Address
This option specifies the base I/O port address and the Interrupt Request address of
Serial Port 1 and Serial Port 2. Select Disabled to prevent the serial port from access-
ing any system resources. When this option is set to Disabled, the serial port physi-
cally becomes unavailable. Select 3F8/IRQ4 to allow the serial port to use 3F8 as its
I/O port address and IRQ 4 for the interrupt address. The options for Serial Port1 are
Disabled,
3F8/IRQ4 (default), 3E8/IRQ4, 2F8/IRQ3, and 2E8/IRQ3. The options
for Serial Port2 are Disabled, 2F8/IRQ3 (default), 3E8/IRQ4, 2E8/IRQ3, and
3F8/IRQ4.