Themis RES-22XR3, Installation Manual

Page: 57 / 162

2-7
Themis Computer
2—Installation and Operation
Installation Procedures
2.1.3 PCI Cards
RES-22XR3 Configuration 1 supports seven PCI-Express 2.0 x8 slots (all in x16
slots). All slots support cards up to 12.28-inches long (see
Figure 2-5 ).
2.1.3.1 Installing Cards
Perform the following steps to install a PCI card:
1. Loosen the captive knurled screw on the PCI card clamp (see A , Figure 2-6 ).
2. Swing the PCI card clamp away from the top of the chassis, exposing the tops
of the PCI card I/O panels (see
B , Figure 2-6 ).
3. Locate the empty slot within which a card will be installed (see Figure 2-5 ).
Figure 2-5. PCI Card Installation, Configuration 1
PCI-Express 2.0 x8
Slot 1
2 3 4 5 6 7
(all in x16 slots)
Slots 1 through 7
Figure 2-6.
PCI Card Clamp
B
A
Loosen the captive knurled screw…
Captive knurled screw
PCI card clamp PCI card I/O panels (7 total)
… and swing the PCI card clamp upward.