Themis RES-22XR3, Installation Manual

Page: 26 / 162

RES-22XR3 Installation Manual - Configuration 1 Version 1.3
xxiv
Themis Computer
A matrix describing RES chassis that are configured for front-I/O connector and
front-PCI card access in a 16” chassis is given in
Table 3 , page xxiv. This chassis
design makes it more convenient to install cables to the system and demands no
access to the rear of the chassis except to replace a fan.
Figure 2 shows the front
view of a standard rear-I/O RES-32 chassis ( Figure 3 on page xxv shows the rear
view); Figure 4 shows the front view of a front-I/O RES-32 chassis ( Figure 5 shows
the rear view).
Table 3. Front I/O 16”-Deep Chassis Manual Matrix
Mother-
board
CPU
Soc
kets
RES-32XR3/FIO Manual P/N RES-22XR3/FIO Manual P/N
X8DAH+-F * 2 117611-024
X8DTU-F 2 117664-024
Naming Key: X8 uvwxyz

System RES- x 2XR3S and RES- x 1XR3, where
x = 3, 2, or 1
*RES-32XR3/FIO motherboard X8DAH+-F supports both audio and video;
however, the naming key does not contain a “T” in the title.
u: D = Double CPU sockets
S = Single CPU socket
v: A = Sound chip; no graphics chip
T = Graphics chip; no sound chip
w: Not applicable
x: i = SATA only
3 = SAS 1.0
6 = SAS 2.0
y: LN4 = Extra gigabit Ethernet controller for two extra ports
z: F = IPMI
blank = No IPMI
Figure 2. Front View of a Standard Rear-I/O RES-22 Chassis (Doors Removed)