Themis RES-22XR3, Installation Manual

Page: 130 / 162

C-12
Themis Computer
RES-22XR3 Installation Manual - Configuration 1 Version 1.3
Step 12: The installation program automatically detects any network devices you have and
displays them in the Network Devices list (see Figure C-12 ).
Step 13: Once you have selected a network device, click Edit . From the Edit Interface
pop-up screen, you can choose to configure the IP address and Netmask (for IPv4 - Prefix
for IPv6) of the device via DHCP (or manually if DHCP is not selected) and you can choose
to activate the device at boot time. If you select
Activate on boot , your network interface is
started when you boot (see Figure C-13
on page C-13
). If you do not have DHCP client
access or you are unsure what to provide here, please contact your network administrator.
Figure C-12. Network Devices List