Themis RES-12XR3, Installation Manual

Page: 122 / 146

C-12
Themis Computer
RES-12XR3 Installation Manual - Configuration 7 Version 1.1
Step 12: The installation program automatically detects any network devices you
have and displays them in the Network Devices list (see Figure C-12 ).
Step 13: Once you have selected a network device, click Edit . From the Edit Inter-
face pop-up screen, you can choose to configure the IP address and Netmask (for
IPv4 - Prefix for IPv6) of the device via DHCP (or manually if DHCP is not
selected) and you can choose to activate the device at boot time.
If you select Activate on boot , your network interface is started when you boot (see
Figure C-13 on page C-13). If you do not have DHCP client access or you are unsure
what to provide here, please contact your network administrator.
Figure C-12. Network Devices List