Themis RES-12XR3, Installation Manual

Page: 109 / 146

Themis Computer
B— Rack-Mount Slide Installation
B-3
B
.
Figure B-2. RES-12XR3 Rack-Mount Slide Installation
Front
Attach the front (short) slide bracket
to the outside slide section with screws,
Outside slide section
washers, and nuts (included in slide kit)
Attach the rear (long) slide bracket
to the outside slide section with screws,
washers, and nuts (included in slide kit)
Attach both inside slide sections to the left and right sides of
the RES-12XR3 chassis with #8-32 screws (included in slide kit)
440.8 339.2 250.6 202.4 149.1 85.6 37.6
Front
0
424.9 24.9
1
2
A
Side View of the RES-12XR3 Slide Installation
B
RES-12XR3 Rack-Mount Slide Installation
Note: All Dimensions are given in millimeters (mm), measured from the “0”
3