Themis CoolShell CS-3U, Installation Manual

Page: 38 / 118

2-6
Themis Computer
CoolShell CS-3U Installation Manual
2.1.4 Audio Connection
To establish an audio link, connect the stereo audio cable adapter (shipped with the
system, see
Figure 2-8 ) to one of the two audio channels (Channel A or Channel B)
on the front panel of the CPU Blade (see Figure 1-2 on page 1-2):
1. Plug the mini-DB9 end (male) of the audio cable adapter (P/N 116510-L01)
into Channel A or Channel B.
2. Connect a mini-stereo-phone plug (as needed) to each of the three stereo audio
connectors at the other end of the audio cable adapter as follows:
• Red Tag—Microphone (Stereo)
• Blue Tag—Line In (Stereo)
• Green Tag—Line Out (Stereo)
3. Repeat the previous two steps to establish a second audio connection.
Figure 2-8.
Connect the Audio Cable Adapter to Channel A or Channel B
To Microphone
To Line In
To Line Out
To Audio Channel A or B