Themis CoolShell CS-3U, Installation Manual

Page: 101 / 118

C-11
Themis Computer
Red Hat Enterprise Linux Installation
Installation
C.2.2.9 Network Configuration
If you do not have a network device, this screen does not appear during your installa-
tion and you should advance to next section
The installation program automatically detects any network devices you have and
display them in the
Network Devices list.
Once you have selected a network device, click Edit . From the Edit Interface pop-
up screen, you can choose to configure the IP address and netmask of the device via
DHCP (or manually if DHCP is not selected) and you can choose to activate the
device at boot time. If you select
Activate on boot , your network interface is started
when you boot. If you do not have DHCP client access or you are unsure what to
provide here, please contact your network administrator
.
Figure C-9.
Network Configuration