background image

1

2

1 Introduction

Thank you for choosing the MLB/WPRO500C. It is our new generation of sensor 
light technology, providing benefi ts in better performance and a quick and easy 
installation compared with other sensor lights on the market. It is integrated with 
years of experience and broad expertise in manufacturing sensor detectors and 
sensor lights for professional use.

The MLB/WPRO500C has the following outstanding features and superior functions 
that will meet most of your needs.

•  Fully adjustable fl oodlight left or right 45º, up 50º and down 35º.

•  Floodlight fi xed by hand, no tools needed.

•  Aluminium alloy light weight body: Heavy duty and durable.

•  Polycarbonate material sensor, giving good weatherproof performance.

•  Additional three 500W halogen fl oodlights can be connected.

•  High quality professional bulb sockets for no more contact problems.

•  Plug-in terminal block for quick and easy wire free connection and convenient 

replacement of the light bulb.

•  Adjustable lens giving a 240º outer zone from 3 to 16m and a 360º inner zone 

giving comprehensive coverage within a 3m radius circle.

•  Multi-segmented lens shields included for blocking zones within a detection area. 

Each segment blocking a detection angle of 10º.

•  Rotatable sensor head from left 60º to right 60º to reposition detection zone.

•  Environmental protection: IP44.

•  Three user friendly adjustments for LUX, TIME and METER (range restriction).

•  Wall and corner mounting brackets supplied.

•  Energy saving integral photocell allows automatic operation at night only.

2 Contents in Package

Article Quantity 

Note

MLB/WPRO500C 

See Fig. 1a

Instructions 1 

Accessories 

 

See Fig. 1b

Fig. 1b

Corner Mounting 

Adapter

Lens Shield

Halogen 

Bulb

Large 

Pan Head 

Screw

Small 

Pan Head 

Screw

Small 

c/sk Head 

Screw

Blind 

Grommet

Glass Frame

Light Body

Outer Ring

Sensor Head

Backplate

Accessories

Fig. 1a

Motion Sensor Light

Summary of Contents for Time Guard MLBPRO500C










Reviews: