PH-II Simple Application Controllers
PH-II GSM Kabel 8
ENG-36
8.1.2
System Configuration with using PH-II GSM Kabel
Figure 8.2: System Configuration with PH-II GSM Kabel
Figure 8.3: PH Programmierkabel Cross Cable Reference
Note
The 4 and 7 signals must be set to high-level on the personal computer side.
If these signals are not set, it will not communicate to PH-II series.
Table 8.1: System Configuration with PH-II GSM Kabel
Item
Using Cable
1
PH-II GSM Kabel
2
PH Programmierkabel cross cable (See Figure 8.3)
3
PH Programmierkabel straight cable for the modem (See Figure 8.5)
4
PH Programmierkabel straight cable for the modem
(specified by modem manufacturer)
PH-II
Series
R
S
T
Q
Personal computer
- Programming Software
(Pharao Software 2.0)
- Dedicated protocol
- E-Mail application
Cellular Phone
(Supporting SMS message)
Sending SMS Message
GSM
Modem
Remote Maintenance, E-Mail (Via GSM)
Normal Modem
Remote Maintenance (Via Telephone Line)
Normal Modem
Normal Modem
Q
Q
T
Using Dedicated Protocol
(9-pin D-Sub female)
(9-pin D-Sub female)
2
3
8
7
6
5
4
2
3
8
7
6
5
4
Summary of Contents for PH-II Series
