Line coupler S
Commissioning
Status: March 16 (Subject to change) Page
16
of
29
3
Commissioning
The parameterization of the Line coupler S is undertaken using application program
Couple Repeat/2,
Couple/1 or Repeat/1
and the Engineering Tool Software ETS.
The application program can be found at
Theben AG/System components/...
For parameterization purposes, a PC or Laptop with ETS and a connection to the KNX, e.g. via RS232,
USB or IP interface, is required.
3.1
Overview
The following table provides an overview of the functions possible with the Line coupler S and the
application programs
Couple Repeat 2.x
(ETS 4) as well as
Couple/1.x
or
Repeat/1.x
(ETS 3).
Line/Area Coupler properties
ETS 3
ETS 4
Function
Line/Area Coupler
Filter group telegrams main group 0...13
Filter group telegrams main group 14...31
Block physically addressed telegrams
Block broadcast telegrams
In case of errors repeat telegrams
Telegram confirmation
= property applies
Repeater properties
ETS 3
ETS 4
Function
Repeater
In case of errors repeat telegrams
= property applies
