59
GB
8. Troubleshooting
Fault
Cause
Detector does not respond to the
remote control
Battery discharged. The battery must be replaced;
Distance between remote control and detector too great.
Remote must be pointed directly at the detector;
Channel incorrectly set;
Detector cannot operate with the remote control
Scenes are not correctly stored
The scene key was not pressed long enough. To store a scene
the scene key must be pressed for at least 5 seconds;
Distance between remote control and detector is too large
Detector does not recognise the
channel allocated to it
Programming key not pressed or more than 20 seconds have
elapsed since the key was pressed last;
Distance between remote control and detector is too large
Subject to alteration and printing errors.
CE declaration of conformity
This device complies with the protection regulations of the EMC directive 2004/108/EC.
