P.1
I N D E X
BEFORE YOU BEGIN
PARTS LIST
ASSEMBLY
SAFETY PRECAUTIONS
P. 1
P. 2
P.3-P.10
P. 10
BEFORE YOU BEGIN
RAMBLER-45
Check all parts. If you find any defective or missing parts contact your local dealer Please DRY FIT
and check for defects for all parts that will require CA or Epoxy for final assembly. Any parts you
find to be defective after the gluing process may be difficult to remove for warranty replacement.
The
manufacturer will replace any defective parts, but will not
extend to the parts that are
good
before gluing to defective parts during assembly.
Warranty
will not
cover
any
parts
modified
by customer.
.
Read through the manual before you begin, so you will have an overall idea of what to do.
1
2
3
Symbols used throughtout this instruction manual comprise of the following :-
3mm
Do not overlook this symbol!
Cut off shaded portion.
Peel off shaded portion
covering film.
Pay close attention here!
Pierce the shaded portion
covering film.
Must be purchased separately!
Drill holes with the specified
diameter (here: 3mm).
Ensure smooth non-binding
movement while assembling.
Apply instant glue
(C.A.glue, super glue.)
Assemble left and right
sides the same way.
Apply epoxy glue.
Apply
thread
locker
Warning
!
