Parts List
P . 2
1. FUSELAGE & BELLY PAN --1 set
2. MAIN WING --1 pc.
3. STABILIZER & ELEVATOR --1 set
4. RUDDER --1 set
5. CANOPY --1 set
6. COWLING --1 pc.
TRANSPARENT DUMMY COWLING --1 pc.
7. PILOT (#PC001050A) --1 pc.
8. SPINNER
Ø
62mm --1 pc.
9. ENGINE MOUNT PL5111-050 --1set
10.FUEL TANK 320cc --1 set
11.SPONGE 10x80x200mm (For Radio Equipment) --2 pcs
12.TAIL LANDING GEAR --1 set
13.MAIN WHEEL
Ø
50mm --2 pcs
14.TAIL WHEEL
Ø
23mm --1 pc.
15.PUSHROD , PUSHWIRE & PULLWIRE:--
COPPER TUBE d2.0xD2.4x8mm (For Rudder) --4 pcs
METAL ROD
Ø
1.8x27mm (For Rudder) --2 pcs
METAL ROD
Ø
1.8x27mm w/Threads (For Rudder) --2 pcs
METAL ROD
Ø
1.8x80mm (For Elevator) --1 pc.
METAL ROD
Ø
1.8x105mm w/Threads (For Aileron) --2 pcs
METAL ROD
Ø
1.8x160mm w/Threads (For Elevator) --1 pc.
METAL ROD
Ø
1.8x165mm w/Threads (For Elevator) --1 pc.
PLASTIC TUBE d2xD3x700mm (For Elevator) --2 pcs
PLASTIC TUBE d2.5xD3x50mm (For Rudder) --2 pcs
WOODEN ROD
Ø
8x580mm (For Elevator) --1 pc.
16.THROTTLE PUSHWIRE
Ø
1.2x420mm
w/Plastic tubed2xD3x200mm --1 set
17.WOODEN PARTS:--
BALSA 10x10x91mm (For Fixing Fuel Tank) --1 pc.
PLYWOOD 1x10x20mm (For Belly Pan ) --2 pcs
PLYWOOD 6x20x33mm (For Belly Pan) --2 pcs
PLYWOOD 3x61x85.5mm (Rudder Servo Stand) --1 pc.
PLYWOOD 3x61x87.5mm
(Throttle & Elevator Servos Stand) --1 pc.
PLYWOOD 3x10x77mm (For Rudder Servo) --2 pcs
PLYWOOD 3x10x79mm
(For Throttle & Elevator Servos) --2 pcs
18.PLASTIC PARTS:--
CLEVIS --8 pcs
SILICON GROMMET d1.5xD6.5mm
(For Cowling, Canopy & Belly Pan)--12 pcs
HORN --4 sets
HORN (w/o-Base For Rudder) --2 sets
STRAPER --3 pcs
19.METAL PARTS:--
LINKAGE CONNECTOR 2.1mm --3 sets
COLLAR 2.1mm w/set screw --1 set
COLLAR 4.1mm w/set screw --2 sets
NUT2mm --2 pcs
NUT 3.5mm --8 pcs
SCREW PA 3x12mm --2 pcs
SCREW PM 2x16mm --4 pcs
SCREW PM 2x20mm --2 pcs
SCREW PM 2x25mm --4 pcs
SCREW PM 3.5x30mm --4 pcs
SCREW PM 4x25mm --4 pcs
SCREW PM 4x35mm --2 pcs
SCREW PWA2.3x8mm --6 pcs
SCREW PWA2.3X12mm--4 pcs
WASHER d3.5xD8mm --8 pcs
WASHER d4xD9mm --4 pcs
WASHER d4xD15mm --2 pcs
20.FUEL TUBE
Ø
6x5mm --9 pcs
HEAT-SHRINK TUBE
Ø
8x40mm --2 pcs
21.DECALS: ST 200 035 --1 set
