background image

It is designed for maximum performance.  Please seek advice if one is not familiar with this kind
of electric powered precision model.  Operating this model without prior preparation may cause
injuries.  Remember, safety  is the most important thing.  Always  keep this instruction manual at 
hand for quick reference.

Warning !  This model is not a toy.

THE WINGS MAKER

FACTORY PRE-FABRICATED

ALMOST-READY-TO-FLY (ARF)  SERIES

MADE IN CHINA

* Specifications are subject to change without notice.*

www thewingsmaker com

.

.

Specifications

Specifications

Before commencing assembly please read these instructions thoroughly

 

 

 

 

 

.

I NST RUCT I ON  M ANUAL

          Wing Span: 36.4 in / 925 mm
           Wing Area: 346 sq in / 22.3 sq dm

     Flying Weight: 28.3 oz / 800 g

 

Fuselage Length: 41.5 in / 1055 mm
             Requires: 4-channel radio w/ 4 micro servos, 2 x Outrunner Motor 
                               KM28251025 w/ Propeller Adaptor HW234040R & 
                               HW2340400, 2 x 15A Brushless ESC,8x4E & 8x4P Propeller, 
                               3 cells 11.1V  1800 mAh Li-Po battery & charger.

(GM070XM)

GM070XMPO30681411

Summary of Contents for GM070XM

















Reviews: