Main Wing
1
Pre-glued
Main Wing
2
PWA2X12mm
Screw
8
Cut away covering for installing the servo as shown.
Use the fishing line supplied inside the wing to lead
the servo lead to the openings of wing center.
PWA2x12mm
Make a slot into the hatch
for the servo horn to come out.
2mm
1mm
Aileron Servo.
Extension lead to
aileron servo.
Main Wing
3
PM2x20mm
Screw
4
PM2x16mm
Ø
1mm pilot holes for The
Wings
Maker
tri-horn are pre-drilled.
Please look for pin-hole marks at under side of control surfaces.
2mm
P.3
