Electronic Diffuser User Manual
Electronic Diffuser
–
User Manual
–
ARDEDNNA
2019V1
The White Company
2 Television Centre, 101 Wood Lane, London, W12 7FR
•
Never use benzene, paint thinner, alcohol, or other chemicals to clean your diffuser. Such
chemicals may damage parts, wear down graduation marks, etc.
•
A dirty ultrasonic diaphragm may result in malfunction or improper operation.
•
Periodically clean the ultrasonic diaphragm.
6. Clean the outer cover and inner cover
If fragrance oil comes into contact with the outer cover or inner cover, or the covers become dirty,
wipe it off with a clean cloth that is soaked in diluted neutral detergent in lukewarm water and wipe
with a dry cloth.
7. Storage
•
Do not store this product in locations subject to high temperatures or humidity.
•
Before using this product after a period of storage, clean the interior of the water tank using
a neutral detergent.
DISPOSAL:
Dispose of this product and packaging materials in accordance with your local regulations. Waste
electrical products should not be disposed of with household waste. Separate disposal facilities exist,
for your nearest facilities, see
TROUBLESHOOTING:
Check the following if the product appears to be broken or operating abnormally.
No power. The
product won't turn
on, or it turns on for a
short time, and then
turns off.
Is there enough water in the water tank?
•
Fill the tank up to 100ml (full) with water.
•
Pushing the mist switch when there is no water or when the water level is
low will result in an electronic beep, after which the diffuser will shut off.
•
Is the AC adapter correctly connected?
•
Check if the AC adapter is connected to the diffuser unit and the electrical
outlet.
•
To be sure, remove the DC plug from the diffuser unit and reinsert before
checking operations.
No mist is emitted.
Mist emits weakly.
Too much mist is
emitted. It turns off
sooner.
•
Is there enough water in the water tank?
•
Fill the tank up to 100ml (full) with water.
•
Water level in the water tank will decrease the closer to the end of the
timed session.
•
Accordingly, mist volume may decrease; however, this is not a
malfunction.
•
Is there too much water in the water tank?
•
Mist will not operate normally if the tank is overfilled (more than 100ml).
•
Is the ultrasonic diaphragm dirty?
•
Turn the power off, and then use a cotton swab or similar to gently clean
any bubbles adhering to the ultrasonic diaphragm.
Are there any bubbles accumulated on or around the ultrasonic diaphragm?
At low water temperatures, bubbles may accumulate on or around the ultrasonic
diaphragm, preventing mist from emitting well.
