The Water Well HIC HZB-13F User Manual Download Page 3

1

3
4

5

6

7

2

3

4

3. Parts and Description 

1. Cover: With control panel.

2. Water Reservoir, situated on the rear of the ice maker with cover

3. Evaporator Grid

4. Ice Scoop

5. Water Drain Cap: Quick release 

    valve to drain water from the unit

6. Ice Basket (stores the ice)

7. Ice Sensor: Stops Ice 

    production when 

    Ice Basket is full

    Situated just above the 

    ice basket 

Control Panel

 

A) Power Indicator Light

B) Power Button (to turn unit on and off)

C) “Add Water” Indicator Light

D) “Full Ice” Indicator Light

4. Operating Procedures & Maintenance

A. Unpacking your Ice Maker

1. Remove the exterior and interior packaging. Check that the Ice Basket 

    and Ice Scoop are included. If any parts are missing, please contact 

    our customer service centre.
2. Clean the interior with lukewarm water and a soft cloth. Take out the 

    basket and clean it.
3. Find a location for your Ice Maker that is protected from direct sunlight

    and other sources of heat (i.e: stove, furnace, radiator). Place the Ice 

    Maker on a level surface.  Make sure that there is at least 13 cm of 

    space between the back and sides of your Ice Maker and the wall.
4. Allow at least one hour for the refrigerant fluid to settle before plugging 

    the Ice Maker in.
5. The appliance must be positioned so that the plug is accessible.

B. Connecting your Ice Maker

* Improper use of the earthed plug can result in the risk of electrical shock. 

  If the power cord is damaged please call our customer service centre.
1. This unit should be properly earthed for your safety. The power cord 

    of this appliance is equipped with a three prong plug which mates with

    a standard three prong wall outlet to minimize the possibility of electric 

    shock. 
2. Plug your appliance into an exclusive, properly installed, earthed wall 

    outlet. Do not under any circumstances, cut or remove the third (earth) 

    prong from the power cord. Any questions concerning power and/or 

    earthing should be directed toward a certified electrician.
3. This appliance requires a standard 220 ~ 240 volt, 50Hz electrical 

    outlet with three prong earth.
Before using your Ice Maker, it is strongly recommended to clean it

thoroughly

DANGER

C

D

B

A

The ice maker is not designed to be installed in an outside area such as a 
garage or a porch. Ambient temperatures of below 10°C or above 38°C will hinder 
the performance of the appliance.

ADD WATER

FULL ICE

ON/OFF

Reviews: