Front Panel View
5
(1) Input Jack
Accepts low- and high- input (such as active pickup) levels.
(2) Clean Volume
Controls the output level of the Clean channel.
(3) Lead Channel Gain
These are used to control the amount of gain of the Lead channel. Turn this control clockwi-
se until the desired amount of overdrive is produced.
(4) Lead Channel Selection Led
These LED lights up when the Lead channel is selected.
(5) Stand By Led
This LED lights up when the Stand By is switched on. The amplifier is equipped with a timer
that starts functioning only when the tubes are sufficiently warm. This lapse of time is indica-
ted by the flash of this led.
(6) Lead Volume
Controls the output level of the Lead channel.
(7) Channel Selection Switch
Use this switch to select Clean or Lead channel.
(8) Tone Controls
Bass, middle and treble controls designed to give maximum tonal variation.
1
2
3
8
8
10
9
7
5
4
6
8
8
8
8
Summary of Contents for 2/50 Series Head
Page 13: ...13...
