The t.mix xmix 802 USB, User Manual

Page: 9 / 24

4 Installation and starting up
Unpack and carefully check that there is no transportation damage before using the
unit. Keep the equipment packaging. To fully protect the device against vibration,
dust and moisture during transportation or storage use the original packaging or
your own packaging material suitable for transport or storage, respectively.
Before connecting the operating voltage and before connecting or disconnecting
audio cables, set all volume controls of the unit to zero to avoid damage to the con-
nected speakers and devices.
NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly
react with the coating of your parquet, linoleum, laminate or PVC floor
and after some time cause permanent dark stains.
In case of doubt, do not put the rubber feet directly on the floor, but use
felt-pad floor protectors or a carpet.
Installation and starting up
xmix 802 USB
9