Mix 1832 FX
www.thomann.de
11
Control Room Source
21
RIGHT
OUTPUT LEVEL
SOLO MODE
AFL
PFL
TO AUX
TO AUX
MAIN MIX
LEFT
LEFT
SUB 3/4
MAIN MIX
R/CTRL
SEND2
STEREO AUX RETURNS
SEND1
SOLO ACTIVE
2TK TO MIX
CTRL ROOM
SUB 3-4
2TK IN
MAIN MIX
SUB 1-2
PHONES
CTRL ROOM SOURCE
L
R
4
SUB 1/2
LEFT
LEFT
RIGHT
RIGHT
RIGHT
AUX SENDS
∞
10
dB
-5
-10
-20
-25
-30
- 40
-60
0
5
∞
10
dB
-5
-10
-20
-25
-30
- 40
-60
0
5
∞
10
dB
-5
-10
-20
-25
-30
- 40
-60
0
5
∞
10
dB
-5
-10
-20
-25
-30
- 40
-60
0
5
∞
10
dB
-5
-10
-20
-25
-30
- 40
-60
0
5
LEVEL SET
-2
-4
-10
-20
-7
-30
10
CLIP
2
4
7
0
SOLO
SOLO
SOLO
SOLO
1
2
∞
15
∞
15
1
2
∞
15
∞
15
1
2
∞
15
∞
15
3
∞
15
∞
15
∞
15
∞
15
4
3
∞
15
∞
15
4-DFX2 SEND
4-DFX2 RETURN
AUX RETURNS SOLO
SUBGROUPS ASSIGN TO MAIN MIX
MAIN GRAPHIC EQ
SUB1
SUB2
SUB3
SUB4
MAIN MIX LEVEL
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
You can choose to monitor any combination of MAIN MIX, SUB1-
2, SUB 3-4 and 2TK IN via these Matrix switches. Engaging these
switches, the stereo signals will be delivered to the Phones, Control
Room and Meters display.
NOTE:
When any SOLO switch was engaged, the SOLO signal will
replace other signals, and that signal will be present to Control Room,
Phones, and Meters.
PHONES/CTRL room controls
22
Rotate these knobs to independently adjust the stereo level of CTRL ROOM and PHONES. These levels can
be adjusted from –
∞
to MAX.
Master AUX SENDS controls
23
These four controls are used to determine the master AUX SEND levels, which can be varied from –
∞
to
+15 dB. Connecting to your mixer an external effect units with no input gain control, you can get a further
+15 dB gain available from these Aux Send outputs. In the same way, the AUX4 master control will provide the
needed level adjustment for the internal effect unit.
SOLO Button
24
The function of these SOLO buttons is similar to channel SOLO buttons. Pressing any SOLO button, the cor-
responding AUX send will be routed to the ctrl room/phones outputs and meters display.
Master STEREO AUX RETURNS controls 1–
25
These four controls set the level of effects received by stereo AUX RETURN connectors, which can be varied
from –
∞
to +15 dB. They are used to provide the further gain for low level effects.
TO AUX SEND 1/2
26
Both these rotary knobs assign the AUX RETURN signals to their respective AUX SEND outputs: The
“TO AUX SEND1” assigns the signal from AUX RETURN1 to AUX SEND1 bus, and “TO AUX SEND2” assigns
the signal from AUX RETURN2 to AUX SEND2 bus. The adjustable range goes from –
∞
to +15 dB.
MAIN MIX & CTRL/R button
27
AUX RETURN3 is equipped with the Main Mix & Ctrl/R button. Release the button to send the stereo signal from
AUX RETURN3 to MAIN MIX buses. Engage the button, then the stereo signal will be sent to CTRL/R output.
SUB1-2/SUB3-/MAIN MIX buttons
28
These three buttons are configured for AUX RETURN4, they can be regarded as the signal assignment switch-
es. When engaging the SUB1-2, the stereo signal from AUX RETURN4 will be assigned to subgroup1/2; in
the same way, pressing SUB3-4 the signal will be assigned to Subgroup3/4, and pressing MAIN MIX it will be
assigned to MAIN MIX buses.
