3
The Sportscreen can be mounted as high as 108
. For higher ou ti gs, o ta t usto er ser i e for a
custom build unit.
Step 2: Head roll Tube Assembly (SEE DETAIL D)
Lay out on a flat surface the head roll tube[1] components.
The head roll tubes[1] and Joiner[2] are supposed to be a tight fit with each other. Connect the head
roll tube[1] and line up the Velcro with each piece
Ensure the joiners[2] are distributed evenly in each tube. They are marked at center.
.
When the Joiner[2] is completely inserted into the tubes[1], the assembled tube should be checked to
ensure it is straight. This can be done by rolling the tube on a flat surface like the garage floor or the
driveway.
a)
Inside Mount
b)
Surface Mount
For the inside mount, the wall mount bracket is
mounted directly to the wood door jamb using 4
woodscrews. The brackets are mounted to the
garage door frame at the upper corners.
The Surface Mount is used for screens that are
mounted directly on the surface of the building.
Roof
Brick/Siding
Inside Mount
Roof
Brick/Siding
Surface Mount
Garage
Door
Garage
Door
