7
TSL.672
MANUAL
1
Slide flat foam washer over the thread
then fit the Click Clack waste into the
basin from the top.
how to install
Waste Installation
2
Slide the silicone sealing washer over
thread below basin, followed by the metal
washer and the attached fixing nut and
tighten. Take care not to over-tighten as
damage may result to the basin.
4
Once all nuts are tightened, open the
water inlet and allow water to drain.
WARNING
: Ensure all connections are
fully tightened to ensure full seal of the
waste trap.
3
Fit waste trap to waste grate, following the
trap installation guide.
