Wireless Microphone Information
E5
E
N
G
L
IS
H
Warning: Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the equipment.
FCC NOTICE
This wireless microphone system complies with Part 90 of FCC Rules.
There is one frequency available for the system. You must get a licence for
the frequency you plan to use before you use the system.
Please look for this website http://wireless.fcc.gov/uls/ to apply the licence
or phone to the nearest FCC offices and contact them to get the necessary
application. Licensibility depends on how you will use the system.
For RF exposure
“IMPORTANT NOTE: To comply with the FCC RF exposure compliance
requirements, no change to the antenna or the device is permitted. Any
change to the antenna or the device could result in the system exceeding
the RF exposure requirements.”
SAFETY INFORMATION
Your wireless microphone contains a low power transmitter. When the EUT
is powered on and it sends out radio frequency (RF) signals. In August
1996, the Federal Communications Commissions (FCC) adopted RF
exposure guidelines with safety levels for wireless devices.
IMPORTANT
To maintain compliance with the FCC's RF exposure guidelines hold the
transmitter and antenna at least 1 inch (2.5 centimetres) from your face and
speak in a normal voice, with the antenna pointed up and away from the
face. Insure that the antenna is at least 1 inch (2.5 centimetres) from your
body when you using your wireless microphone.
Use only the supplied antenna. Unauthorised antennas, modifications, or
attachments could damage the transmitter and may violate FCC
regulations.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO
O R T V I N T E R F E R E N C E C A U S E D B Y U N A U T H O R I Z E D
MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS
COULD VOID THE USER’S AUTHORITY TO OPERATE THE
EQUIPMENT.
Operation of this device is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of
the device.
