— E6 —
Connection
Energy Saving (Auto Power System-APS)
The unit will automatically enter the Standby mode after 20 minutes in the following
situations:
1. There is no audio playback on CD/USB/Bluetooth/Line in mode;
2. The playback of external music player had been stopped but the audio cable is still
plugged into the LINE IN jack.
The unit can be resumed to turn on by pressing the button once.
APS is for energy saving purposes.
Connecting to AC Power
Insert the AC power cord into a
conveniently located AC outlet having
120V AC, 60Hz.
Note:
Make all connections before connecting to
AC power.
Inserting Batteries
1
Slide the battery door in the direction
the arrows to reveal the battery
compartment. Insert eight (8) “C” size
alkaline batteries (not included) as
indicated on the diagram.
2
Replace cover tightly before operating.
E-3
MAKING THE CONNECTIONS
INSTALLATION OF BATTERIES
“C” size
UM2 1.5V
“C” size
UM2 1.5V
“C” size
UM2 1.5V
“C” size
UM2 1.5V
“C” size
UM2 1.5V
“C” size
UM2 1.5V
“C” size
UM2 1.5V
“C” size
UM2 1.5V
DC OPERATION
1. Slide the battery door in the direction the arrows to reveal the
battery compartment. Insert eight (8) “C” size alkaline batteries
(not included) as indicated on the diagram.
2. Replace cover tightly before operating.
CAUTION:
• Replace all batteries at the same time.
• Do not mix old batteries with new batteries.
Battery Precautions
The precautions below should be followed when using batteries in
this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the
batteries as indicated in the battery compartment. Reversed
batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline
and Carbon Zinc) or old batteries with fresh ones.
4. If the device is not to be used for a long period of time,
remove the batteries to prevent damage or injury from
possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged,
they can overheat and rupture. (Follow battery manufacturer’s
directions.)
6. Rechargeable batteries are to be removed from the product
before being charged.
7. Rechargeable batteries are only to be charged under adult
supervision.
8. Exhausted batteries are to be removed from the product.
9. Batteries shall not be exposed to excessive heat such as
sunshine, fire or the like.
CONNECTING THE POWER
Insert the DC plug of the power adapter into the
DC 9V jack on the unit. You can power the
system from a standard AC outlet by using the
supplied Power Adapter (The adapter operates
on AC 100V~240V/50Hz-60Hz ).
CAUTION:
• The included AC adapter is for use with this
unit only. Do not use it with other equipment.
• When the adapter is plugged in, the apparatus
is not completely disconnected from the
mains, even when the power is turned off.
SML283-eng and fra.V4_Layout 1 11/7/16 8:37 AM Page 3
INSTALLATION OF BATTERIES
‘C’ SIZE, UM-2
1.5V
‘C’ SIZE, UM-2
1.5V
‘C’ SIZE, UM-2
1.5V
‘C’ SIZE, UM-2
1.5V
‘C’ SIZE, UM-2
1.5V
‘C’ SIZE, UM-2
1.5V
‘C’ SIZE, UM-2
1.5V
‘C’ SIZE, UM-2
1.5V
