The Singing Machine CLASSIC STVG569BT, Instruction Manual

Page: 9 / 14

PROGRAM
!
!
Use this button to program and play back songs in a preselected order.
Step 1: Programming should be done in the stop mode only.
Step 2: Press the SKIP buttons ( - SKIP - ) to select a desired track.
Step 3: Press PROGRAM button to confirm entry. You can repeat the same steps up to a maximum of 24 tracks.
Step 4: Press PLAY button when you have completed programming and you are ready to start singing.
Press the STOP button twice to clear all the programmed entries.
MONITOR ON/OFF
KARAOKE FUNCTIONS
!
Press MONITOR ON/OFF button to ON if you want to display a CDG lyrics on the Singing Machine’s
monitor.
Sing along with the music by plugging in the provided microphone into either one of the microphone jacks on the unit.
Adjust the MIC VOLUME control to a desired level and obtain the best performance.
Adjust the ECHO control to enhance your voice for a concert hall effect.
Adjust the BALANCE control to separate the prerecorded singer’s voice and music when using a multiplex karaoke disc.
AUTO VOICE CONTROL can be activated by rotating the Auto Voice Control knob to right. The vocals on the multiplex
recording will be muted when using the microphone
When the microphone is not in use the pre-recorded vocals will
resume on a multiplex disc.
D
D
Warning - Tapping or dropping the microphone while it is on can permanently damage your microphone. Resist
the urge to swing the microphone around by the cord!
Warning - To avoid Microphone feedback please avoid being too close to the speaker.
MIC VOLUME
ECHO
BALANCE
AUTO VOICE CONTROL
.
(MULTIPLEX DISCS ONLY)
E8
ENGLISH
CD OR CD+G OPERATION
Press the PROGRAM button, PROG SET : 00 XX
XX Here " " stands for the total number of tracks, and it is blinking on the display.
!
!
!
!
BLUETOOTH OPERATION
During playing, press the NEXT or PREVIOUS button to skip to the track desired, press PLAY/PAUSE button to pause,
press again to resume. Press PAIR button to disconnect the current connection, press again to reconnect again.
NOTE: The unit will automatically connect with the device connected before after the Bluetooth function is switched on.
successful connection.
Press the CDG/BT Button to switch to Bluetooth mode, "BLUE TOOTH" will appear on display and the PAIR indicator
flashes, after a few seconds, a sound will be heard, now it is in pairing and searching mode, start the Bluetooth function
on the external device, the pairing name "Singing Machine" will appear, select it and make pairing, the unit will send a
piece of sound, the "PAIR" indicator stop blinking after