background image

5

RECORDING

Please note Chrome or Metal tapes are not recommended for use in this product.

Select desired function (CD or AM/FM) or TAPE for voice recording via internal condenser
microphone.
Insert a blank tape with recording tabs intact into the cassette compartment.
Operate the desired function and select the material to be recorded.
Press the RECORD key, the PLAY key will automatically engage.
The product has a built-in ALC circuit which automatically adjusts the record level for quality
recording.
To temporarily stop or edit the recording press the PAUSE button.
To stop recording  press the STOP/EJECT button.

1.

2.
3.
4.
5.

6.

7.

RECORDING FROM CD

Set the Function Selector to the CD position.
Press the Record Key and the Play Key at the same time.
Press the CD Play/Pause button.
To stop recording, press the Stop button of CD player. Then press the Stop/Eject key
of the cassette deck.

1.

2.
3.
4.

USING THE CD PLAYER

Switch the function selector to CD.
Press the CD OPEN button to open the CD door and insert a disc with the label
facing uppermost . Close the lid. (Ensure the disc is correctly mounted on the spindle
and locked in place)
After a few seconds, the product will scan the disc and the display will show the total
number of tracks on the disc. If the disc is incorrectly inserted or defective the display
will show "--".
Press PLAY/PAUSE button to start playback, then adjust the VOLUME control to
desired levels. Current track being played will be shown in the display.
To temporarily pause playback press the PLAY/PAUSE button, the play indicator
flashes in the display. To resume playback press this button again.
To stop playback press the STOP button. The display will show the total number of
tracks on the display. This remains in  the display until either the disc is removed or
another function is selected.
To skip up or down tracks on the disc use either ">>I or I<<" skip button.

1.

2.

3.

4.

5.

6.

7.

Note:

 CD-R/CD-RW can be playable.

REPEAT PLAY

To repeat the track currently being played press the REPEAT button once. "REP." will
show in the display.
To repeat the entire disc (continuous play) press the REPEAT button twice. "REP. A" will
show in the display.
To return to normal play mode press REPEAT button until "REP. A" disappears from the
display.

1.

2.

3.

Summary of Contents for Bratz SMB-637









Reviews: